Table of Contents
Advertisement
7.3
Device
The general device data is configured in this menu.
Device dialog box
Parameter
Parameter
Device name
Language
Country settings
after power on
(setup only)
Selection/settings
Name (example)
(max. 20 characters)
Language 1: English (example)
Select language (drop-down menu).
Yes ( ), No ( )
7 Configuration
Description
The device name is used in the setup
program, Web server, and the PCC and
PCA3000 PC programs.
Language of display texts (max. 15 lan-
guages)
All texts for a language can be changed
using the setup program. This is also
where the language order is defined. The
first 15 languages are available on the
device.
If "Yes," is selected, the user can config-
ure settings immediately after switching
on the device the next time. The param-
eter is then automatically reset to "No" in
the device so that no settings occur after
switching back on again. The parameter
is not automatically reset in the setup file.
This parameter can also be set in the pa-
rameterization:
chapter 8.6 "System data",
Page 198
The country settings are also configured
after switching on the device for the first
time as part of the startup.
97
Advertisement
Table of Contents
