Table of Contents
Advertisement
7.20.2
Batch lines
Device dialog box
Parameter
Parameter
Text left column
Contents of right
column
Selection/settings
Program name (in line 1)
Use default text or enter other text.
This defines how to compose the texts in the right column of a batch report.
No entry
Default text
Selection from the text list
Selection by digital signal
Batch name
Batch number ...
Batch start
7 Configuration
Description
This parameter specifies the text in the
left column for the selected line of the
batch report.
The field remains empty.
A set text – defined by the "Default text"
parameter – is used.
The user can select the text from the text
list (batch texts).
After reconfiguration, the default text is
initially displayed; the user must select
the desired text from the list in the "Cur-
rent batch" visualization. The texts can
be defined in the setup program.
A text from the text list (batch texts) is
used. The selection is performed using a
maximum of 6 digital signals (text selec-
tion bits).
The texts can be defined in the setup
program.
The batch name is displayed.
The batch number is used along with a
text (default text). The batch number is
incremented at the end of batch report-
ing. It can be pre-assigned using the de-
vice in the parameterization menu.
Start (date and time) of batch reporting
175
Advertisement
Table of Contents
