Alarm - JUMO LOGOSCREEN 601 Operating Manual

7 Configuration
Parameter
Response in case
of a fault
7.13.1

Alarm

Device dialog box
Parameter
Parameter
Activation/Type
?
Alarm/Event list
?
Alarm/Event text
Limit value
?
130
Selection/settings
Behavior of the status signal if the input signal delivers an error value.
Signal inactive
Signal active
Signal unchanged
Selection/settings
Inactive
Min. alarm
Max. alarm
Inactive (signal only)
Event
Alarm/event
Use default text or enter other text.
-99999 to 0 to +99999
Description
Status signal is inactive.
Status signal is active.
Status signal keeps the state it had be-
fore the fault.
Description
Limit value monitoring is inactive.
Status signal is active if the value drops
below the limit value.
Status signal is active if the limit value is
exceeded.
In out-of-limit cases, only the status sig-
nal is activated.
The alarm/event text is entered in the
event list.
The alarm/event text is entered in the
alarm list and the event list. The collec-
tive alarm is activated and the text of the
last alarm to occur is displayed in the sta-
tus bar.
Text entered in the alarm and event list
and displayed in the status bar.
If the limit value is exceeded (max. alarm
case) or the value drops below the limit
(min. alarm case), an out-of-limit case
exists.