Table of Contents
Advertisement
Setup dialog box
Parameter
Parameter
Image name
X position
Y position
Visible
Centered
The "..." button is used to open the list of the available images in the setup program:
"Replace" button: The selected image is replaced by a different image, which must be selected from a
file directory as a graphic in BMP or PNG format (max. 640 × 379 pixels; 16-bit color depth). During this
process, the name (title) under which the image appears in the list can be changed so that it is different
from the file name. If the "Transparency: Color pixel top left" option is active (checked), all pixels or areas
that use the same color as the pixel top left are transparent in the process screen.
NOTE!
For an image to be displayed correctly in the online visualization, it should always be imported as a PNG
format graphic. Transparent areas must be created with a graphics program up front. The "Transparen-
cy: Color pixel top left" option cannot be used for this.
9 Configuration – in setup program only
Selection/settings
Selection from list of images
0 ... 639
0 ... 378
Yes ( ), No ( )
Yes ( ), No ( )
Description
Background image for the process
screen
X coordinate of the upper left corner of
the background image in the process
screen
Y coordinate of the upper left corner of
the background image in the process
screen
"Yes" releases the display of the back-
ground image in the process screen.
"Yes" horizontally and vertically centers
the background image in the process
screen (X and Y position are then unim-
portant).
233
Advertisement
Table of Contents
