Table of Contents
Advertisement
7 Configuration
Parameter
Default text
Delete line
First text
Number of texts
176
Selection/settings
Batch end
Batch duration
Barcode
User name
External text variable ...
Text number
Text x
The parameter decides whether or not an edited text (in the right column) is reset
after a batch is completed.
Yes, No
1 ...
1 ... 50
Description
End (date and time) of batch reporting
Time difference between batch start and
batch end
The text in the selected line will be filled
by a barcode scanner.
Name of logged-on user
Text that can be sent to the device via the
interface (see interface description).
The external text variables can also be
written by a barcode scanner (see
chapter 11.4.2 "Texts and process val-
ues", Page 276).
The text is selected from the text list
(batch texts). The text number is defined
by an analog variable (analog selector).
The text (max. 160 characters) is used in
the current batch report if the text in the
right column is composed of "Default
text" or "Batch number".
For "Selection from the text list" or "Bar-
code," the text is used as a default.
If "Yes", the text in the right column is re-
placed with its original content at the
batch end (default text).
The parameter is available if the text in
the right column is composed of the in-
ternal text list (batch texts) ("Selection
from the text list" or "Select through digi-
tal signals"). It is the first text from the list
which the user can select.
In the setup program, the selectable
texts are shown in a separate window
during the configuration.
The parameter is available if the text in
the right column is composed of the in-
ternal text list (batch texts) (for "Selection
from the text list").
In the setup program, the selectable
texts are shown in a separate window
during the configuration.
Advertisement
Table of Contents
