NOTE!
Email transmission should be tested in the scope of startup. If there is an error, this leads to an entry with
an error code in the device's event list.
The interface description contains a list of all error codes ("Error codes as integer return values").
9.4.1
Email server
NOTE!
The following settings may only be performed by qualified personnel.
Setup dialog box
Parameter
Parameter
Authentication
User name
Password
SMTP server
Encryption
9 Configuration – in setup program only
Selection/settings
Authentication at logon to email server
None
SMTP-Auth
User name (max. 64 characters) for logging onto the email server
Your user name
(Example)
Password (max. 64 characters) for logging on to the email server
Your password
(Example)
Address (URL, max. 64 characters) of the email server for SMTP
smtp.example.net
(Example)
Type of encryption between email client and email server (depending on the email
provider)
None
TLS
StartTLS
Description
No authentication
Authentication with user name and pass-
word on SMTP server
Enter name (also applies if Authentica-
tion = no).
Enter password (only for SMTP Auth).
Enter server address.
Unencrypted
Transport Layer Security (formerly: SSL)
TLS where the connection is unencrypt-
ed to begin with (encryption takes place
while the connection is being estab-
lished)
213