Submenu "Set Cloc": Setting The Real-Time Clock - JUMO 202710 Operating Manual

Parameter "SCAL": slope correction of the temperature measurement
Use the
Menu/parameter
ATC
Press the
press the
setting menu or
press the
measurement mode.

8.4.2 Submenu "SEt CLOC": setting the real-time clock

Overview of the parameters
After calling up the setting menu with
"SEt CLOC", use
ATC
(1)
(2)
(3)
All manuals and user guides at all-guides.com
and keys to set the slope correction:
Setting option
oFF
rH mV mV pH
H
-5.0 to 5.0
ok CAL AL Logg pH
key to save the setting and move to the next parameter or
key to save the setting and move to the next submenu of the
key to save the setting, quit the device settings, and return to
to select the parameter to be configured.
rH mV mV pH
H
CAL
3
ok CAL AL Logg pH
Parameters
"CLOC": setting the time, See page 44
"YEAr": setting the year, See page 44
"dAtE": setting the date, See page 45
8 Device settings
Meaning
No slope correction of the
temperature measurement
Slope correction of the
temperature measurement in %
and selecting the submenu
(1)
(2)
(3)
43