Table of Contents
Advertisement
5.4.5
Report
A report shows the statistical information for the relevant group. A report contains the maximum, mini-
mum, and average values of the analog signals during the recording time (the recording period is con-
figurable). A distinction is made between the current (ongoing) report and the completed report.
To create a report, it must be activated in the configuration for the relevant group.
View
(1)
(2)
(3)
(1)
Designation (pointer) and signal abbrevi-
ation (configurable) of the analog signal
(2)
Values of analog signal in the current
(not completed) report
The type (configurable; here: external)
decides when the report is stored and
thus completed.
(3)
Call up detailed view of analog signal
(4)
Go to the next analog signal within the
group
(5)
Go to the report for the next group
5 Operation
(4)
(5)
55
Advertisement
Table of Contents
