7 Configuration
Overview of inputs and outputs and internal functions
The following table provides an overview of all inputs and outputs, as well as the internal functions with
digital or analog output signals. The number of optional inputs and outputs depends on the device ver-
sion (see order details, options 1 to 3).
Inputs/outputs/functions
Analog inputs 1 to 6
Analog outputs 1 to 2
Digital inputs 1 to 12
Digital inputs/outputs 1 to 12
Relay outputs (changeover contact) 1
External analog inputs 1 to 24
External digital inputs 1 to 24
External text variables 1 to 10
External event texts 1 to 4
Limit value monitoring functions 1 to 24
Counters/integrators 1 to 6
Flow measurements 1 to 2
Math functions 1 to 6
Logic functions 1 to 6
ST code
- ST analog outputs 1 to 40
- ST digital outputs 1 to 40
- ST alarm outputs 1 to 32
- ST fault output
92
Notes
Optional extra
Optional extra
Optional extra
Optional extra, can be switched individually
As a standard feature
As a standard feature, via interface
As a standard feature, via interface
As a standard feature, via interface
As a standard feature, via interface; 1 text per
group
As a standard feature
As a standard feature; incl. 2 high-speed counters
(via digital inputs/outputs 1, 2)
As a standard feature; high-speed inputs are re-
quired for the "Digital" signal type
Optional extra (extra code 260)
Optional extra (extra code 260)
Optional extra (extra code 221); see
chapter 9.10 "ST code", Page 223