Table of Contents
Advertisement
Parameter
Parameter
Activation/Type
?
Alarm/Event list
?
Alarm/Event text
Limit value
?
Switching differ-
ential
?
Alarm suppres-
sion
?
Alarm delay
?
Activation/type, limit value, switching differential
(1)
Limit value for min. alarm
(2)
Limit value for max. alarm
(3)
Switching differential
Alarm/Event list
All events and their time of occurrence are added to the event list. If the event is an alarm, newly occur-
ring alarms and their time of occurrence are additionally added to the alarm list. If an alarm is made in-
active, it is removed from the alarm list and the time of removal is added to the event list.
Selection/settings
Inactive
Min. alarm
Max. alarm
Inactive (signal only)
Event
Alarm/event
Use default text or enter other text.
-99999 to 0 to +99999 l/s
0 to 99999 l/s
Digital selector
No selection
0 s to 32767 s
(3)
(1)
7 Configuration
Description
Limit value monitoring is inactive.
Alarm signal is active if the value drops
below the limit value.
Alarm signal is active if the limit value is
exceeded.
In out-of-limit cases, only the alarm sig-
nal is activated.
The alarm/event text is entered in the
event list.
The alarm/event text is entered in the
alarm list and the event list. The collec-
tive alarm is activated and the text of the
last alarm to occur is displayed in the sta-
tus bar.
Text entered in the alarm and event list
and displayed in the status bar.
If the limit value is exceeded (max. alarm
case) or the value drops below the limit
(min. alarm case), an out-of-limit case
exists.
The switching differential is used to sup-
press constant switching of the alarm
signal in the event of fluctuations of the
input signal around the limit value.
The selected digital signal (high-active)
prevents the alarm signal being activat-
ed.
Delay time for alarm signal activation
(3)
(2)
1
Alarm signal on
0
Alarm signal off
1
0
145
Advertisement
Table of Contents
