Submenu "Set Cloc": Setting The Real-Time Clock - JUMO 202710/20 Operating Manual

Parameter "SCAL": slope correction of the temperature measurement

8.4.2 Submenu "SEt CLOC": setting the real-time clock

Overview of the parameters
Use the and
Menu/parameter
rH mV mV pH
H
ATC ok CAL AL Logg pH
Press the key to save the setting and move to the next parameter or
press the key to save the setting and move to the next submenu of the
setting menu or
press the key to save the setting, quit the device settings, and return to
measurement mode.
After calling up the setting menu with
"SEt CLOC", use
rH mV mV pH
H
ATC ok CAL AL Logg pH
Parameters
(1) "CLOC": setting the time, See page 44
(2) "YEAr": setting the year, See page 44
(3) "dAtE": setting the date, See page 45
keys to set the slope correction:
Setting option Meaning
oFF No slope correction of the
temperature measurement
-5.0 to 5.0 Slope correction of the
temperature measurement in %
to select the parameter to be configured.
(1)
CAL
3
(2)
(3)
8 Device settings
and selecting the submenu
43