Table of Contents
Advertisement
7 Configuration
7.18.9
Event texts
Each group can be assigned additional event texts selected from the text list. The selection is controlled
by up to 5 digital signals or one analog signal which determine the text number in the text list. Each time
the text number is changed, the corresponding text is copied from the text list into the event list.
The text is entered as a comment in the event list of the batch concerned. If there is no text at the se-
lected point in the text list (or if the value is outside the value range), no entry is made in the event list.
Device dialog box
Parameter
Parameter
First text
Digital signal 1
(bit 0)
to
Digital signal 5
(bit 4)
?
Text number
Digital signal ...
32 texts from the text list are available for selection by digital signals; the first selectable text is deter-
mined by the "First text" parameter.
First text + binary number = text number
Digital signal 1 has a priority of 2
168
Selection/settings
1 to 500
Digital selector
No selection
Analog selector
No selection
0
, digital signal 2 a priority of 2
Description
First selectable text (text number) in the
text list (text offset; only if selected
through binary number)
Bit 0 (LSB) to bit 4 (MSB) form a binary
number which defines the text, taking the
text offset into account.
Analog signal whose value is used as the
text number for selecting the text from
the text list.
If there are decimal places, the system
rounds up or down to the nearest integer.
1
, etc.:
Advertisement
Table of Contents
