Submenu "Set Cloc": Setting The Real-Time Clock - JUMO 202710/30 Operating Manual

6 Device settings
Parameter "SCAL": slope correction of the temperature measurement
Use the
Menu/parameter
Press the
press the
setting menu or
press the
measurement mode.

6.4.2 Submenu "SEt CLOC": setting the real-time clock

Overview of the parameters
After calling up the setting menu with
"SEt CLOC", use
SAL
Lin
(1)
(2)
(3)
30
All manuals and user guides at all-guides.com
and keys to set the slope correction:
Setting option
oFF
-5.0 to 5.0
key to save the setting and move to the next parameter or
key to save the setting and move to the next submenu of the
key to save the setting, quit the device settings, and return to
to select the parameter to be configured.
mg/l kOhm mS µS
CAL
3
nLF AL Logg %/K 1/cm
Parameters
"CLOC": setting the time, see page 31
"YEAr": setting the year, see page 31
"dAtE": setting the date, see page 32
Meaning
No slope correction of the
temperature measurement
Slope correction of the
temperature measurement in %
and selecting the submenu
(1)
(2)
(3)