7 Configuration
7.9
Relays
The device is equipped with a relay output (changeover contact).
Device dialog
Parameter
Parameter
Signal source
Channel designa-
tion
Channel descrip-
tion
Signal inversion
Behavior after power on
During the initialization phase of the device, the relay is in idle state.
120
Selection/settings
Digital selector
No selection
REL 01
Use default text or enter other text.
Relay output 01
Use default text or enter other text.
Inversion of the digital signal for controlling the relay
No
Yes
Description
Digital signal for controlling the relay
"No selection" means that the relay is in
idle state.
Name (abbreviation) with max. 5 charac-
ters that is used in the visualizations.
Description (designation) with max. 21
characters
The signal is not inverted.
The signal is inverted.