Table of Contents
Advertisement
10.9.7
Touch
This function is used to calibrate the screen's touch function.
Setup dialog box
The current values of the parameters are read out from the device when opening the dialog. They are
for information purposes only and cannot be changed by the user.
Parameter
Minimum value X Left limit of the respective centering field (top left, bottom left, top right, bottom right)
Constant X
Maximum value X Right limit of the respective centering field
Minimum value Y Lower limit of the respective centering field
Constant Y
Maximum value Y Upper limit of the respective centering field
The calibration is started and the user must tap the centering fields that are consecutively displayed on
the device screen (touch the center point of the box). The screen color briefly changes if the centering
field is not touched. Following successful calibration, a corresponding message is displayed in the setup
program.
10 Online parameter (setup only)
Description
X coordinate of the center point of the respective centering field
Y coordinate of the center point of the respective centering field
263
Advertisement
Table of Contents
