6 Device settings
Parameter "SCAL": slope correction of the temperature measurement
6.4.2 Submenu "SEt CLOC": setting the real-time clock
Overview of the parameters
30
Use the
and
Menu/parameter
Press the
key to save the setting and move to the next parameter or
press the
key to save the setting and move to the next submenu of the
setting menu or
press the
key to save the setting, quit the device settings, and return to
measurement mode.
After calling up the setting menu with
"SEt CLOC", use
SAL
mg/l kOhm
mS
µS
Lin
nLF
AL Logg
%/K 1/cm
Parameters
(1)
"CLOC": setting the time, see page 31
(2)
"YEAr": setting the year, see page 31
(3)
"dAtE": setting the date, see page 32
keys to set the slope correction:
Setting option
Meaning
oFF
No slope correction of the
temperature measurement
-5.0 to 5.0
Slope correction of the
temperature measurement in %
to select the parameter to be configured.
(1)
CAL
3
(2)
(3)
and selecting the submenu