Table of Contents
Advertisement
7.8
Digital inputs/outputs
The digital inputs/outputs (optional extra) can be individually switched between input and output. The in-
puts are actuated with an external voltage DC 0/24 V or via a potential-free contact (auxiliary voltage in
place). The outputs provide an output signal of DC 0/24 V.
As digital inputs, they are pooled into groups along with other digital signals in the "Groups" configuration
and are then available for further use via these groups.
Device dialog box
Parameter
Parameter
Function
Channel designa-
tion
Channel descrip-
tion
Signal source (for
output only)
Signal inversion
Behavior after power on
During the device's initialization phase, all connections are actuated as digital inputs, even if they were
previously configured as digital outputs.
7.8.1
Signal monitoring
Signal monitoring (alarm) can be activated for each digital input/output.
Selection/settings
Input
Output
DIO ...
Use default text or enter other text.
Digital input/output ...
Use default text or enter other text.
Digital selector
No selection
Inversion of the input or output signal
No
Yes
7 Configuration
Description
Digital input
Digital output
Name (abbreviation) with max. 5 charac-
ters that is used in the visualizations.
Description (designation) with max. 21
characters
Digital signal output via the digital output.
"No selection": the output signal corre-
sponds to the "Low" state (0 V for non-in-
verted signals, 24 V for inverted signals).
The signal is not inverted.
The signal is inverted.
117
Advertisement
Table of Contents
