Analog Channels - JUMO LOGOSCREEN 601 Operating Manual

7 Configuration
7.18.2

Analog channels

A group can consist of up to six analog channels (Channel 1 to Channel 6).
Device dialog box
Parameter
Parameter
Input signal
?
Line width
Tol. band active
Upper tolerance
band limit
Lower tolerance
band limit
158
Selection/settings
Analog selector
No selection
Determines the width of the graphic measured value display.
Thin
Thick
Available as from channel 2 of a group.
No, Yes
Only available for channel 1 of a group.
0 to 10 to 100
Only available for channel 1 of a group.
-100 to -10 to 0
Description
Signal source for the channel
Default setting for group 1:
Channel 1: analog input 1
Channel 2: analog input 2
Channel 3: analog input 3
Thin line width (1 pixel)
Thick line width (2 pixels)
If "Yes", the channel is compared with
channel 1 of the group. It must be en-
sured that channel 1 of the group is ac-
tive (Input signal <> No selection).
The "Upper tolerance band limit" and the
current measured value of channel 1
form the upper limit of the tolerance
band.
The "Lower tolerance band limit" and the
current measured value of channel 1
form the lower limit of the tolerance
band.