Cellular Commands; Ph (Phone Number); S# (Iccid); Im (Imei) - Digi XBee 3 Cellular LTE-M User Manual

AT commands

Cellular commands

The following AT commands are cellular configuration and data commands.

PH (Phone Number)

Reads the SIM card phone number.
Parameter range
N/A
Default
Set by the cellular carrier via the SIM card

S# (ICCID)

Reads the Integrated Circuit Card Identifier (ICCID) of the inserted SIM.
Parameter range
N/A
Default
Set by the SIM card

IM (IMEI)

Reads the device's International Mobile Equipment Identity (IMEI).
Parameter range
N/A
Default
Set in the factory
II (Subscriber identity)
Reads the IMSI (International Mobile Subscriber Identity) from the SIM inserted into the module.
Parameter range
N/A
Default
N/A

MN (Operator)

Reads the network operator on which the device is registered.
Parameter range
N/A
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Cellular commands
186