At Command - 0X08 - Digi XBee 3 Cellular LTE-M User Manual

API frames

AT Command - 0x08

Description
Use this frame to query or set parameters on the local device. Changes this frame makes to device
parameters take effect after executing the AT command.
Format
The following table provides the contents of the frame. For details on frame structure, see
format.
Field
Field name value
Frame type 0x08
Frame ID
AT
command
Parameter
value
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Data
type Description
Byte
Byte Identifies the data frame for the host to correlate with a
subsequent ACK. If set to 0, the device does not send a response.
Byte Command name: two ASCII characters that identify the AT
command.
Byte If present, indicates the requested parameter value to set the
given register. If no characters are present, it queries the register.
AT Command - 0x08
API frame
252