System Commands; Kl (Device Location); Kp (Device Description); Kc (Contact Information) - Digi XBee 3 Cellular LTE-M User Manual

AT commands

System commands

The following commands are used to assign descriptors to the XBee Smart Modem, which distinguish
the devices from each other in Remote Manager.

KL (Device Location)

Sets or displays a user-defined physical location for the XBee displayed in Remote Manager.
Range
Up to 20 ASCII characters
Default
One ASCII space character (0x20).

KP (Device Description)

Sets or displays a user-defined description for the XBee displayed in Remote Manager.
Range
Up to 20 ASCII characters
Default
One ASCII space character (0x20)

KC (Contact Information)

Sets or displays user-defined contact information for the XBee displayed in Remote Manager.
Range
Up to 20 ASCII characters
Default
One ASCII space character (0x20).
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
System commands
242