Update The Firmware Using Web Services In Remote Manager - Digi XBee 3 Cellular LTE-M User Manual

Update the firmware
c. Locate and click Digi XBee 3 Cellular LTE-M/NB-IoT Gating Firmware to download the
zip file.
d. Unzip the file. The file contains either a .ebin or a .gbl file.
2. Set up a persistent connection to connect the device to Remote Manager. See
persistent connection to a remote
3. Log into Remote
4. In your Remote Manager account, click Device Management > Devices.
5. Select the first device you want to update. To select multiple devices (must be of the same
type), press the Control key and select additional devices.
6. Click More in the Devices toolbar and select More > Update > Update Firmware. The Update
Firmware dialog appears.
7. Click Browse to select the .ebin or .gbl file that you unzipped earlier.
8. Click Update Firmware. The updated devices automatically reboot when the updates are
complete.
Note The update is immediately rejected and an error is returned if the device is going into
sleep mode or is being shut down. See
9. When all changes are complete,

Update the firmware using web services in Remote Manager

Remote Manager supports both synchronous and asynchronous firmware update using web services.
The following examples show how to perform an asynchronous firmware update. See the Remote
Manager documentation
Before you begin, verify the TCP connection method your device uses to connect to Remote Manager:
query once a day or use a persistent TCP connection. See
WARNING! The firmware version 1140F reorganizes the product's flash memory and
upgrades the product to version 11410. You cannot downgrade to a version earlier than
11410 after installing 1140F/11410.
Note Digi Remote Manager requires TCP and will not work with NB-IoT, unless the carrier supports
TCP.
1. Download the updated firmware file for your device from Digi's support site.
a. Go to the
b. Scroll down to the Firmware Updates section.
c. Locate and click Digi XBee 3 Cellular LTE-M/NB-IoT Gating Firmware to download the
zip file.
d. Unzip the file and locate the .gbl file in the unzipped directory.
2. Send an HTTP SCI request to Remote Manager with the contents of the downloaded .gbl file
converted to base64 data. Refer to the the following examples:
Examples for .gbl:
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
XBee.
Manager.
Clean
disconnect the device
for more details on firmware updates.
Digi XBee 3 Cellular LTE-M support
Update the device firmware
shutdown.
from Remote Manager.
TCP connection.
page.
Restore
85