Modem Status - 0X8A - Digi XBee 3 Cellular LTE-M User Manual

API frames

Modem Status - 0x8A

Description
Cellular component status messages are sent from the device in response to specific conditions.
Format
The following table provides the contents of the frame. For details on frame structure, see
format.
Field name
Frame type
Status
Note The BLE Connect and BLE Disconnect events are reported over the UART/SPI interface in API
mode when a valid Bluetooth connection has been made and API mode has been unlocked, and also
when an unlocked connection disconnects.
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Field value Data type
0x8A Byte
## Byte
Description
0 = Hardware reset or power up
1 = Watchdog timer reset
2 = Registered with cellular network
3 = Unregistered with cellular network
0x0E = Remote Manager connected
0x0F = Remote Manager disconnected
0x32 = BLE Connect
0x33 = BLE Disconnect
0x34 = Bandmask configuration failed
0x35 = Cellular component update started
0x36 = Cellular component update failed
0x37 = Cellular component update completed
0x38 = XBee firmware update started
0x39 = XBee firmware update failed
0x3A = XBee firmware update applying
Modem Status - 0x8A
API frame
262