Install Regulatory Firmware Using Remote Manager - Digi XBee 3 Cellular LTE-M User Manual

Regulatory firmware
Note After you have completed your testing using the regulatory firmware, you should
device firmware.
1. Add your XBee device to XCTU
2. From within XCTU, click the Configuration working modes button
3. From the Radio Modules list, select the device that you want to update.
4. Click Update firmware. The Update the radio module firmware dialog appears and displays
the available and compatible device firmware for the selected XBee module.
5. Select the product family XBXC3, the function set including the name Regulatory, and then the
newest firmware listed.
6. Click Update to update the device firmware.
7. Once the regulatory firmware is loaded, configure the XBee for the testing required.
Configure regulatory firmware for testing the Bluetooth
n
Configure regulatory firmware for testing the cellular
n
8. After you have completed your testing using the regulatory firmware, you should
device firmware.

Install regulatory firmware using Remote Manager

You can install the regulatory firmware on your XBee from Remote Manager.
Note After you have completed your testing using the regulatory firmware, you should
device firmware.
Note Digi Remote Manager requires TCP and will not work with NB-IoT, unless the carrier supports
TCP.
WARNING! The firmware version 1140F reorganizes the product's flash memory and
upgrades the product to version 11410. You cannot downgrade to a version earlier than
11410 after installing 1140F/11410.
To perform a firmware update:
1. Download the updated firmware file for your device from Digi's support site.
a. Go to the
b. Scroll down to the Firmware Updates section.
c. Locate and click Digi XBee 3 Cellular LTE-M/NB-IoT RegulatoryFirmware to download
the zip file.
d. Unzip the file.
2. Log into Remote
3. In your Remote Manager account, click Device Management > Devices.
4. Select the first device you want to update. To select multiple devices (must be of the same
type), press the Control key and select additional devices.
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
if you haven't already done so.
Digi XBee 3 Cellular LTE-M support
Manager.
Install the regulatory firmware
.
radio.
component.
page.
re-install the
re-install the
re-install the
302