Firmware Version/Information Commands; Vr (Firmware Version); Vl (Verbose Firmware Version); Hv (Hardware Version) - Digi XBee 3 Cellular LTE-M User Manual

AT commands

Firmware version/information commands

The following AT commands are firmware version/information commands.

VR (Firmware Version)

Reads the firmware version on the device.
Parameter range
0 - 0xFFFFF [read-only]
Default
Set in firmware

VL (Verbose Firmware Version)

Shows detailed version information including the application build date and time.
Parameter range
N/A
Default
Set in firmware

HV (Hardware Version)

Read the device's hardware version. Use this command to distinguish between different hardware
platforms. The upper byte returns a value that is unique to each device type. The lower byte indicates
the hardware revision.
Parameter range
0 - 0xFFFF [read-only]
Default
Set in firmware

HS (Hardware Series)

Read the device's hardware series number.
Parameter range
N/A
Default
Set in the firmware

CK (Configuration CRC)

Displays the cyclic redundancy check (CRC) of the current AT command configuration settings.
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Firmware version/information commands
223