Am (Airplane Mode); N# (Preferred Network Technology); Sq (Reference Signal Received Quality) - Digi XBee 3 Cellular LTE-M User Manual

AT commands
Bit
0
...
127
Default
0xFFFFFFFFFFFFFFFF (bands 1-64 enabled)

AM (Airplane Mode)

When set, the cellular component of the XBee Smart Modem is fully turned off and no access to the
cellular network is performed or possible.
Parameter range
0 - 1
0 = Normal operation
1 = Airplane mode
Default
0

N# (Preferred Network Technology)

Allows the XBee 3 Cellular LTE-M/NB-IoT module to select the preferred network technology. A reboot
or power cycle is required for any parameter changes to become active.
Note For the N# command configuration to take effect, the
Profile). Setting the CP command to 1 configures the enabled 4G LTE bands for NB-IoT. If CP is not set
to 1, the N# command value is ignored.
Range
0 - 3
Parameter
0
1
2
3
Default
0

SQ (Reference Signal Received Quality)

Returns the Reference Signal Received Quality (RSRQ) value.
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
LTE Band
1
128
CP
Description
LTE-M with NB-IoT fallback.
NB-IoT with LTE-M fallback.
LTE-M only.
NB-IoT only.
Cellular commands
command must be set to 1 (No
190