Example: Schedule A Task To Update The Device Firmware Using Remote Manager - Digi XBee 3 Cellular LTE-M User Manual

Get started with Digi Remote Manager
Note You must upgrade your device to the latest firmware for all features to be available. See
the firmware.
Note Digi Remote Manager requires TCP and will not work with NB-IoT, unless the carrier supports
TCP.
In this configuration example, you are changing the device to poll four times a day instead of just once.
In this case, you should change the DF parameter to 360 minutes.
1. Log into Remote
2. Click Device Management > Schedules.
3. Click New Schedule. The New Schedule page displays.
Note The Steps to schedule a task wizard may display. Click the x in the upper left corner to
close the wizard. See
more information.
4. In the Description field, enter a name for the schedule, such as "Configure Reporting
Frequency."
5. Add the following tasks:
a. Click SM/UDP > SM/UPD Request Connect. A task is added to the dialog.
b. Click Device > RCI Command. A task is added to the dialog.
Change the RCI command to the following:
<rci_request>
<set_setting>
<remote_manager>
</remote_manager>
</set_setting>
</rci_request>
c. Click Device > Disconnect. A task is added to the dialog.
6. Click Schedule in the lower right corner of the dialog to schedule the tasks to run. The
schedule screen displays.
Note You can also click Save as to save this schedule for future use.
7. Select the device(s) on which you want to run this schedule. You can add more than one device.
8. Click Run Now.
9. Click Device Management > Operations to view information about the operation. See
Operations
Example: Schedule a task to update the device firmware using
Remote Manager
You can use a scheduled task to update the XBee Cellular firmware. Since the device is configured by
default to poll Remote Manager once a day, you need to be able to set up a scheduled task to update
the device's firmware to take advantage of new features and fixes. To update the firmware to a new
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Manager.
Schedule walk-through feature
<DF>360</DF>
in the Digi Remote Manager® User Guide
Configure Remote Manager features by scheduling tasks
in the Digi Remote Manager® User Guide
for more information about this page.
Update
for
54