Verify The Connection Between A Device And Remote Manager; Configure Remote Manager Features By Scheduling Tasks - Digi XBee 3 Cellular LTE-M User Manual

Get started with Digi Remote Manager
5. Click Add to add the device. The XBee is added to your inventory.
6. Click OK to close the Add Devices dialog and return to the Devices view.

Verify the connection between a device and Remote Manager

By default, the XBee is configured to enable communication with Remote Manager. The
communication between XBee and Remote Manager is achieved using periodic UDP operations.
You should verify the default settings to ensure that communcation will work as desired.
1.
Launch XCTU
2. Verify that the
3. Configure the frequency of polls for Remote Manager activity using the
default is 1440 minutes (24 hours).
4. Enable the SM/UDP feature in Remote Manager for each device. See

Configure Remote Manager features by scheduling tasks

Remote Manager provides tools to perform common management and maintenance tasks on your
XBee device. A Remote Manager task is a sequence of commands that can be performed on one or
more XBee Cellular devices. Tasks can then be assigned to a schedule. When a scheduled task is run it
becomes an active operation and can be monitored for status and completion.
Note You must upgrade your device to the latest firmware for all features to be available. See
the firmware.
Some typical examples of useful things that can be done with scheduled tasks include:
Change configuration
n
Update your MicroPython application
n
Update your security certificates
n
Perform a data service device request
n
Send an SMS message to your device
n
Scheduled tasks can be created and performed through the following methods:
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
.
MO command is set to 6, which is the default.
and libraries to add features and capabilities
Configure Remote Manager features by scheduling tasks
DF command. The
Enable SM/UDP.
Update
51