Applicable Firmware And Hardware; Sim Cards; Nb-Iot Network - Digi XBee 3 Cellular LTE-M User Manual

Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide

Applicable firmware and hardware

This manual supports the following firmware:
114xx and above
n
Note This manual uses the placeholder value "xx" in the firmware versions listed above, as the
manual documents the released features as of the time of its writing. Digi International periodically
releases new firmware containing bug fixes and new features. As new firmware is released and
distributor stock is refreshed, the new firmware will gradually become available without the need to
update. However, no guarantees can be made that a specific version of the firmware will be populated
on any given XBee as delivered. If a specific revision is desired, it is the user's responsibility to ensure
that version is loaded onto all XBees purchased.
Note You must upgrade your device to the latest firmware for all features to be available. See
the firmware.
It supports the following hardware:
XB3-C-A2-UT-xxx
n

SIM cards

The XBee Smart Modem requires a 4FF (Nano) size SIM card. The SIM interface supports both 1.8 V
and 3 V SIM types.

NB-IoT network

NB-IoT network is supported by XBee 3 Cellular. Note the following:
NB-IoT does not support roaming. You cannot roam between networks.
n
For NB-IoT, TCP support is dependent on the network. Contact your network provider for
n
details.
For NB-IoT, SMS support is dependent on the network. Contact your network provider for
n
details.
Digi Remote Manager® requires TCP and will not work with NB-IoT unless the network
n
supports TCP.
The SIM card in the device determines whether the device supports NB-IoT, LTE-M, or both.
n
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Applicable firmware and hardware
Update
17