Ai (Association Indication); Ftp Ota Update Indication) - Digi XBee 3 Cellular LTE-M User Manual

AT commands
Parameter range
0 - 0xFFFFFFFF
Default
N/A

AI (Association Indication)

Reads the Association status code to monitor association progress. The following table provides the
status codes and their meanings.
Status code Meaning
0x00 Connected to the Internet.
0x22 Registering to cellular network.
0x23 Connecting to the Internet.
0x24 The cellular component is missing, corrupt, or otherwise in error. The cellular
component requires a new firmware image.
0x25 Cellular network registration denied.
0x2A Airplane mode.
0x2B USB Direct active.
Cellular component is in PSM.
0x2C
Note
provider for details.
Modem shut down. See
0x2D
0x2E Low voltage shut down.
0x2F Bypass mode active.
0x30 An update is in process.
Regulatory testing has been enabled. See
0x31
(Enable/disable test
0xFF Initializing.
Parameter range
0 - 0xFF [read-only]
Default
N/A
FI (FTP OTA Update Indication)
Reports the result of the previous FTP OTA operation.
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
For NB-IoT, TCP support is dependent on the network. Contact your network
SD (Shutdown).
mode).
Firmware version/information commands
Regulatory testing commands and %#
224