Remote Manager Reference; Enable Sm/Udp - Digi XBee 3 Cellular LTE-M User Manual

Get started with Digi Remote Manager
File Management view
You can upload and manage files in the Remote Manager File Management view.
1. Prepare the file that you want to upload.
a. Find the file on your hard drive.
b. Rename the file and append a hash sign (#) to the end of the file name.
2. Set up a persistent connection to connect the device to Remote Manager using one of the
following methods:
Remote Manager: A persistent connection can be set up in Remote Manager. This
n
option should be used when you have many deployed devices and no local access. See
Restore persistent connection to a remote
XCTU: This option allows immediate access, and should be used when you have local
n
access, such as when using a development kit or in a lab environment. See
Options)
3. Log into Remote
4. Click Device Management > Devices.
5. Select the device that you want to configure.
6. Click Properties in the toolbar. As an alternative, double-click on the device name. The
Properties page appears.
7. Click File Management. The File Management view appears.
8. Click the upload icon. The Upload File dialog appears.
a. Click Browse to browse for the file you want to upload. The selected file displays in the File
field. Make sure that the file name is appended by a hash sign (#).
b. Click OK. The uploaded file displays in the File Management view. Note that the file name
is no longer appended by a hash sign (#).
9. When all changes are complete,

Remote Manager reference

Enable SM/UDP

You can use the SM/UDP feature to leverage the very small data footprint of Remote Manager SM
protocol over UDP.
Note Battery Operated Mode may be enabled in Digi Remote Manager. Review the
Mode section to determine the impact of enabling this mode on SM/UDP.
1. Log into Remote
2. Click Device Management > Devices.
3. Select the device that you want to configure.
4. Click More > SM/UDP > Configure. The SM/UDP dialog appears.
5. Select SM/UDP Service Enabled to enable SM/UDP.
6. Click Save.
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
and MO (Remote Manager
Manager.
disconnect the device
Manager.
Remote Manager reference
XBee.
Options). Both must be enabled.
from Remote Manager.
DO (Device
Battery Operated
61