Digi XBee 3 Cellular LTE-M User Manual page 55

Get started with Digi Remote Manager
version you will need to obtain the .gbl file for the new firmware from our support site. This file is one
of the files in the .zip (for example, XBXC-31011.zip) archive that you can download for the product.
Note You must upgrade your device to the latest firmware for all features to be available. See
the firmware.
Note Digi Remote Manager requires TCP and will not work with NB-IoT, unless the carrier supports
TCP.
To upgrade using a scheduled task perform the following steps:
1. Download the updated firmware file for your device from Digi's support site.
a. Go to the
b. Scroll down to the Firmware Updates section.
c. Locate and click Digi XBee 3 Cellular LTE-M/NB-IoT Gating Firmware to download the
zip file. If you have already upgraded past the gating firmware, click XBee Cellular LTE-
M/NB-IoT Firmware to download the zip file.
d. Unzip the file. The file contains either a .ebin or a .gbl file.
2. Log into Remote
3. Make sure that you have enabled SM/UDP. See
4. Click Device Management > Schedules.
5. Click New Schedule. The New Schedule page displays.
Note The Steps to schedule a task wizard may display. Click the x in the upper left corner to
close the wizard. See
more information.
6. In the Description field, enter a name for the schedule, such as "Update XBee Firmware."
7. Add the following tasks:
a. Click SM/UDP > SM/UDP Request Connect. A task is added to the dialog.
b. Click Device > Gateway Firmware Update.
c. Click Browse and select the .gbl file (for example, XBXC-11411.gbl) for the new firmware to
update.
d. Click Device > Disconnect. A task is added to the dialog.
8. Click Schedule in the lower right corner of the dialog to schedule the tasks to run. The
schedule screen displays.
Note You can also click Save as to save this schedule for future use.
9. Select the device(s) on which you want to run this schedule. You can add more than one device.
10. Click Run Now.
11. Click Device Management > Operations to view information about the operation. See
Operations
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Digi XBee 3 Cellular LTE-M support
Manager.
Schedule walk-through feature
in the Digi Remote Manager® User Guide
Configure Remote Manager features by scheduling tasks
page.
Enable SM/UDP.
in the Digi Remote Manager® User Guide
for more information about this page.
Update
for
55