Update The Cellular Module From A Pc Using The Easyflash Firmware Update - Digi XBee 3 Cellular LTE-M User Manual

Update the firmware
Windows example
C:\Users\admin\over-the-
wire>C:\Users\admin\AppData\Local\Programs\Python\Python37-
32\python.exe update.py COM17
Linux examples
$ python update.py /dev/tty5
$ python update.py COM10 --baud=115200
8. Press Enter to begin running the script. For a detailed description of how the update script
works, see
9. When complete, a digi-update.log text file is created, which contains a copy of the log
messages emitted to the terminal while the script was running.
10. A successful update appears as:
2019-06-27 16:06:28,479 update.py: INFO: Reading cellular component version string (ATMV)...
2019-06-27 16:06:28,501 update.py: INFO: Update successful. New MV value: L0.00.00.05.08,A.02.04
2019-06-27 16:06:28,502 update.py: INFO: Cellular component update successful.
2019-06-27 16:06:28,503 update.py: INFO: Restoring previous baud rate and RTS/CTS configuration.
2019-06-27 16:06:28,743 update.py: INFO: Completed update of XBee 3 Cellular device with IMEI
352753090861053
2019-06-27 16:06:28,744 update.py: INFO: Updates complete. This script should automatically exit in a
moment. If it does not exit, use Ctrl-C to stop the script.
11. If you have downloaded more than one script, follow the process again, starting with Step 4.
Update the cellular module from a PC using the EasyFlash Firmware
Update
A critical issue patch and a maintenance release to update the cellular modem firmware of the XBee 3
Cellular LTE-M module using EasyFlash and the XBIB-CU-TH development board are available.
These updates apply to the XBee 3 Cellular device containing the following cellular modem:
u-blox SARA-R410M-02B
For instructions, see
EasyFlash Firmware
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
How the script works.
Digi XBee 3 Cellular LTE-M Cellular Module Patch and Maintenance Release via
Update.
Update the cellular firmware
96