N1 (Dns Address); N2 (Dns Address); Dl (Destination Address) - Digi XBee 3 Cellular LTE-M User Manual

AT commands
Range
Device firmware versions...
Ending in *16
Ending in *11 to *15
Ending in *10 or earlier
Default
N/A

N1 (DNS Address)

Displays the IPv4 address of the primary domain name server.
Parameter Range
Read-only
Default
0.0.0.0 (waiting on cellular connection)

N2 (DNS Address)

Displays the IPv4 address of the secondary domain name server.
Parameter Range
Read-only
Default
0.0.0.0 (waiting on cellular connection)

DL (Destination Address)

The destination IPv4 address or fully qualified domain name used by Transparent mode.
To set the destination address to an IP address, the value must be a dotted quad, for example
XXX.XXX.XXX.XXX.
To set the destination address to a domain name, the value must be a legal Internet host name, for
example remotemanager.digi.com
Parameter range
0 - 128 ASCII characters
Default
0.0.0.0
The destination IPv4 address or fully qualified domain name used by Transparent mode.
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Range
4 - 20 ASCII digits, including an optional + prefix
5 - 20 ASCII digits
7 - 20 ASCII digits
Addressing commands
199