Digi XBee 3 Cellular LTE-M User Manual page 2

Revision history—90002258
Revision Date
R October
2020
S November
2020
T December
2020
U January
2021
V January
2021
W May 2021
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United
States and other countries worldwide. All other trademarks mentioned in this document are the
property of their respective owners.
© 2021 Digi International Inc. All rights reserved.
Disclaimers
Information in this document is subject to change without notice and does not represent a
commitment on the part of Digi International. Digi provides this document "as is," without warranty of
any kind, expressed or implied, including, but not limited to, the implied warranties of fitness or
merchantability for a particular purpose. Digi may make improvements and/or changes in this manual
or in the product(s) and/or the program(s) described in this manual at any time.
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Description
Updated Transmit (TX) Status -
Added information for File system
Updated Software libraries.
Added Mexico (IFETEL).
Updated update instructions:
Updated command: D0 (DIO0/AD0).
New command: FC (Frequency Channel
Updated Power Saving Mode
Added design recommendations for
Updated the instructions for
testing the cellular component.
Updated Socket Connect -
Updated Socket Connect Response -
Updated commands: CP (Carrier Profile)
Technology).
Updated HM (Health Metrics).
Updated Regulatory approvals
Updated cellular antenna
Updated the example to include information about Allow Offline option.
Updated prerequisites: Update an XBee module cellular component
using FOTA (over the air)
Updated maximum baud rates.
Updated Enable SM/UDP.
Added PG (Ping).
0x89.
API frames.
over the wire and over the
Number).
(PSM).
SIM cards.
configuring the regulatory firmware for
0x42.
0xC2.
and N# (Preferred Network
and added Brazil (ANATEL)
information.
air.
information.
2