AT commands
Default
0x03
$0 (TLS Profile 0)
Specifies the TLS certificate(s) to use in Transparent mode (when
(Transmit (TX) Request: IPv4 - 0x20
Note
For NB-IoT, TCP support is dependent on the network. Contact your network provider for
details.
Format
server_cert;client_cert;client_key
Parameter range
From 1 through 127 ASCII characters.
Default
N/A
$1 (TLS Profile 1)
Specifies the TLS certificate(s) to use for
set to 1.
Note
For NB-IoT, TCP support is dependent on the network. Contact your network provider for
details.
Format
server_cert;client_cert;client_key
Parameter range
From 1 through 127 ASCII characters.
Default
N/A
$2 (TLS Profile 2)
Specifies the TLS certificate(s) to use for
set to 2.
Note
For NB-IoT, TCP support is dependent on the network. Contact your network provider for
details.
Format
server_cert;client_cert;client_key
Parameter range
From 1 through 127 ASCII characters.
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
or
Tx Request with TLS Profile - 0x23
Tx Request with TLS Profile - 0x23
Tx Request with TLS Profile - 0x23
Network commands
IP (IP Protocol)
= 4) or API mode
with profile set to 0).
transmissions with profile
transmissions with profile
194