Power Measurement Commands; Command; L (Low Voltage Shutdown Base Threshold) - Digi XBee 3 Cellular LTE-M User Manual

AT commands
Field
STATE
PROTOCOL
LOCAL_PORT
REMOTE_PORT
REMOTE_ADDRESS
Parameter range
0x00 - 0xFE
Default
-

Power measurement commands

The following commands enable you to access voltage readings and manage a value for minimum
allowed operating voltage.
%V command
Measures the supply voltage of the XBee VCC pin for the device in mV units.
Parameter range
N/A
Default
N/A

%L (Low voltage shutdown base threshold)

Sets the voltage threshold in millivolts at which the XBee enters a shutdown state. You must enable
this feature by setting the
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Description
The state of the socket:
ALLOCATED
n
CONNECTING
n
CONNECTED
n
LISTENING
n
BOUND
n
CLOSING
n
The protocol of the socket:
UDP
n
TCP
n
TLS
n
The local port of the socket. This is 0 unless the socket is
explicitly bound to a port.
The remote port of the socket.
The remote IPv4 address for the given socket. This is 0.0.0.0 for
an unconnected socket.
DO command bit 4. See Low voltage
Power measurement commands
shutdown.
244