Ble Commands; Bi (Bluetooth Identifier); Bl (Bluetooth Mac Address); Bp (Bluetooth Advertisement Power Level) - Digi XBee 3 Cellular LTE-M User Manual

AT commands

BLE commands

The following AT commands are BLE commands.

BI (Bluetooth Identifier)

A human-friendly name for the device. This name appears in BLE advertisement messages.
If set to the default (a single ASCII space character), the Bluetooth identifier displays as the device
name, such as XBee 3 Cellular LTE-M/NB-IoT.
If you are using XBee Mobile, adjustments to the filter options will be needed if this value is populated.
Parameter range
A string of case-sensitive ASCII printable characters from 1 to 22 bytes in length.
Default
0x20 (an ASCII space character)

BL (Bluetooth MAC address)

The BL command reports the EUI-48 Bluetooth device address (BLE MAC address). Due to standard
XBee AT Command processing, leading zeroes are not included in the response when in command
mode.
Parameter range
N/A
Default
N/A

BP (Bluetooth Advertisement Power Level)

Sets or displays the output power level that will be used for Bluetooth advertisements.
Parameter range
0x0 - 0x3
Bit
0
1
2
3
Default
3 (8 dBm)

BT (Bluetooth enable)

Enables or disables the Bluetooth functionality.
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Description
-20 dBm
-10 dBm
0 dBm
8 dBm
BLE commands
235