Review Device Status Information From Remote Manager; Manage Secure Files In Remote Manager - Digi XBee 3 Cellular LTE-M User Manual

Get started with Digi Remote Manager

Review device status information from Remote Manager

You can view address, BLE, cellular, firmware, and I/O sampling status information for a XBee device in
Remote Manager. The device must be in the Remote Manager inventory device list and be active.
Note Digi Remote Manager requires TCP and will not work with NB-IoT, unless the carrier supports
TCP.
1. Set up a persistent connection to connect the device to Remote Manager using one of the
following methods:
Remote Manager: A persistent connection can be set up in Remote Manager. This
n
option should be used when you have many deployed devices and no local access. See
Restore persistent connection to a remote
XCTU: This option allows immediate access, and should be used when you have local
n
access, such as when using a development kit or in a lab environment.
2. Log into Remote
3. Click Device Management > Devices.
4. Select the device that you want to configure.
5. Click Properties in the toolbar. As an alternative, click Properties > Edit Device
Configuration. The configuration Home page appears.
6. Click Status in the toolbar to display the status sub-menus.
7. Click on the status group that has information you want to display. The status information is
related to AT commands. For information about each AT command in the categories, click on
the appropriate link below.
Addressing
n
Bluetooth
n
Cellular
n
Firmware Version/Information
n
I/O
n
8. Click Home to return to the configuration Home page.
9. When all changes are complete,

Manage secure files in Remote Manager

You can interact with files on the XBee device from Remote Manager, using either the
command interface)
You can securely upload files by appending a hash sign (#) to the end of the file name. After the upload,
the hash sign (#) is not retained as part of the file name. For example, you could upload a file named
my-cert.crt appended with a hash sign (#): my-cert.crt#. After the upload is complete, the file is named
my-cert.crt.
Note Uploading secure files in Remote Manager has the same result as doing an
See Secure files for more information.
SCI (Server command interface)
You can use the SCI (Server command interface)
For more information, see the
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Manager.
disconnect the device
or in the File Management view.
file_system section in the
Manage data in Remote Manager
XBee.
from Remote Manager.
file_system command to securely upload a file.
Digi Remote Manager Programming
SCI (Server
ATFS XPUT locally.
Guide.
60