Regulatory firmware
%A (Get transmit power)
Use this command to get the transmit power value set using AT%9.
Parameter range
N/A
Example
Get transmit power:
AT%A
%D (Start receive mode)
Use this command to start receive mode on the EARFCN channel specified using AT%7.
Parameter range
N/A
Examples
Start receive mode:
AT%D
%? (Query test state)
Use this command to query test state.
Parameter range
Bit
Description
Inactive (Test mode not yet started.)
0
Transition (Attempting to activate test mode.)
1
2
Off (Test mode started, but no active test.)
3
Receive mode
4
Transmit mode
5
An error occurred
Example
Query test state:
AT%?
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Regulatory testing commands
308