Modes
4. After rebooting, enter Command mode and verify that Bypass operating mode is active by
querying
AI (Association Indication)
It may take a moment for Bypass operating mode to become active.
Leave Bypass operating mode
To configure a device to leave Bypass operating mode:
1. Set
AP (API Enable)
2. Send
WR (Write)
3. Send
FR (Force Reset)
4. After rebooting, enter Command mode and verify that Bypass operating mode is not active by
querying
AI (Association Indication)
Restore cellular settings to default in Bypass operating mode
Send AT&F1 to reset the cellular component to its factory profile.
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
and confirming that it returns a value of 0x2F.
to something other than 5.
to write the changes.
to reboot the device.
and confirming that it returns a value other than 0x2F.
Bypass operating mode (DEPRECATED)
136