D? (Network-Provided Edrx Cycle Length); Pg (Ping) - Digi XBee 3 Cellular LTE-M User Manual

AT commands
Parameter range
N/A
Default
0xea60 (60 seconds)

D? (Network-provided eDRX cycle length)

The value currently being used as the eDRX cycle length (in milliseconds). If eDRX is not active, or
registration with the network has not yet been achieved, an empty response is returned.
Parameter range
N/A
Default
N/A

PG (Ping)

Sends an ICMP Echo Request to the specified host and reports round trip time when Echo Response is
received. The command sends a single request with a timeout of five seconds. If five seconds elapses
with no response the command will timeout and report an error.
Parameter range
Valid FQDN (Fully Qualified Domain Name) or IP address
Default
N/A
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Network commands
197