Get The Digi Xbee Mobile Phone Application - Digi XBee 3 Cellular LTE-M User Manual

Get started with BLE
4. In the Bluetooth Options section, select Enabled[1] from the BT Bluetooth Enable command
drop-down.
5. Click the Write setting button
Note If BLE has been previously configured, the Bluetooth authentication not set dialog does
not appear. If this happens, click Configure in the Bluetooth Options section to display the
Configure Bluetooth Authentication dialog.
6. Click Configure in the dialog. The Configure Bluetooth Authentication dialog appears.
7. In the Password field, type the password for the device. As you type, the Salt and Verifier fields
are automatically calculated and populated in the dialog as shown above. Make a note of the
password, as this password is used when you connect to this XBee device via BLE using the
XBee Mobile
8. Click OK to save the configuration.
Get the Digi XBee Mobile phone application
To see the nearby devices that have BLE enabled, you must get the free Digi XBee Mobile application
from the iOS App Store or Google Play and downloaded to your phone.
1. On your phone, go to the App store.
2. Search for Digi XBee Mobile.
3. Download and install the application.
The Digi XBee Mobile application is compatible with the following operating systems and versions:
Android 5.0 or higher
n
iOS 11 or higher
n
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
. The Bluetooth authentication not set dialog appears.
app.
Get the Digi XBee Mobile phone application
Digi
46