Deprecated Kit (Pn Xk3-C-A2-Ut-U Or Xk3-C-N1-Ut-E) - Digi XBee 3 Cellular LTE-M User Manual

Deprecated kit (PN XK3-C-A2-UT-U or XK3-C-N1-UT-E)

This section includes hardware and connection information for the deprecated kit, Digi XBee 3 Cellular
LTE-M/NB-IoT (part numbers XK3-C-A2-UT-U or XK3-C-N1-UT-E). The deprecated kit includes the XBIB-
U-DEV development board.
Note Information about how to configure and manage the XBee on the XBIB-U-DEV development
board can be found in this guide. The XBee configuration is the same for both kits and development
boards.
To connect the hardware using the XBIB-U-DEV development board, you should perform all of the
steps below in the order shown.
1. Identify the kit contents
2. Determine cellular service and acquire a SIM card
3. Connect the hardware
4. Install and upgrade XCTU
5. Update the device and cellular firmware using XCTU
6. Configure your module for cellular connectivity
7. Check for cellular registration and connection
8. Use one of the following methods to verify your cellular connection:
Connect to the Echo server
n
Connect to the ELIZA server
n
Connect to the Daytime server
n
Optional steps
You can review the information in these steps for more XBee connection examples and examples of
how to use MicroPython.
1. Review additional connection examples to help you learn how to use the device. See
connection
2. Review introductory MicroPython examples. You can use MicroPython to enhance the
intelligence of the XBee to enable you to do edge-computing by adding business logic in
MicroPython, rather than using external components.
Example: hello world
n
Example: turn on an LED
n
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
examples.
XBee
324