At Command Response - 0X88 - Digi XBee 3 Cellular LTE-M User Manual

API frames

AT Command Response - 0x88

Description
A device sends this frame in response to an AT Command (0x08) frame. Some commands send back
multiple frames.
Format
The following table provides the contents of the frame. For details on frame structure, see
format.
Field
Field name value
Frame type 0x88
Frame ID
AT
command
##
Status
Parameter
value
Digi XBee® 3 Cellular LTE-M/NB-IoT Global Smart Modem User Guide
Data
type Description
Byte
Byte Identifies the data frame for the host to correlate with a
subsequent ACK. If set to 0, the device does not send a response.
Byte Command name: two ASCII characters that identify the AT
command.
Byte 0 = OK
1 = ERROR
2 = Invalid command
3 = Invalid parameter
Byte Register data in binary format. If the register was set, then this
field is not returned.
AT Command Response - 0x88
API frame
259