GE H
EALTHCARE
D
GA091568, R
IRECTION
3-7-6
Connecting Probes
3-7-6-1
Introduction to Connecting Probes
Probes can be connected at any time, whether the unit is on or off.
The system has three types of probe ports; one PD probe port, three PDT probe ports (Figure 3-9) and
a Doppler probe port.
•
The PD probe port is compatible with the Vivid 7 probe connectors.
•
The three PDT probe ports are specific to the VIVID E9 probe connectors.
•
The Doppler probe port is used for CW Doppler probes (non-sector-probes), sometimes called
PEDOF probes.
Figure 3-9 Probe connectors
3 - 24
5
EVISION
1 - PD PROBE PORT: FOR VIVID 7 COMPATIBLE PROBE CONNECTORS
2 - PDT PROBE PORTS: FOR VIVID E9 SPECIFIC PROBE CONNECTORS
NOTE! The Doppler probe port is not illustrated here.
Section 3-7 - Completing the setup
VIVID E9 S
M
ERVICE
ANUAL