GE VIVID E9 Service Manual page 544

GE H
EALTHCARE
D GA091568, R
IRECTION
8-9-1-4 Rear Casters installation procedure
1.) Position the Caster so it align with the hole for the fixing bolt.
2.) Install the fixing bolt (M12 X 40 mm). Use a 10 mm HEX key, Torque: 130 Nm.
3.) Remove the Wooden Wedge.
4.) Roll the VIVID E9 off the Bevel Edged Board.
5.) To replace the other Rear Caster, repeat all the steps, starting from
procedure" on page 8-209,
other side of the VIVID E9.
6.) Install the Rear Cover.
7.) Install the Rear Bumper.
8.) Install the Side Covers.
8 - 210
5
EVISION
Section 8-9 - Casters and Brakes replacement
but now using the Bevel Edged board and the Wooden Wedge on the
VIVID E9 S M
ERVICE
8-9-1-3 "Rear Casters removal
ANUAL