GE VIVID E9 Service Manual page 406

GE H
EALTHCARE
D GA091568, R
IRECTION
8-5-17-2 Remove the Bulkhead Cover (cont'd)
Figure 8-75 Bulkhead Cover removed
8-5-17-3 Install the Bulkhead Cover
Follow these steps to install the Bulkhead Covers:
1.) Place the Bulkhead Cover's mounting angle onto the lower edge of the bulkhead opening.
NOTE: Tuck any cables within the cover to avoid pinching the cables.
Figure 8-76 Install Bulkhead Cover
MOUNTING ANGLE
2.) Push the two upper tab locks into the openings in the Frame UI Carrier.
8 - 72
5
EVISION
BULKHEAD
COVER
LOWER TAB
LOCKS
Section 8-5 - Replacing Covers and Bumpers
Tab locks
VIVID E9 S M
ERVICE ANUAL