Lcd Monitor Adjustments; Purpose Of This Section; Cautions And Warnings; Access To Adjustments - GE VIVID E9 Service Manual

GE H
EALTHCARE
D GA091568, R
IRECTION
Section 6-2

LCD Monitor adjustments

6-2-1

Purpose of this section

This section describes how to adjust the 19" LCD monitor for optimal performance.
NOTE: On the 17 inch monitor, there are no adjustments on the monitor itself. To adjust the backlight,
blue tint and contrast, see:
6-2-2

Cautions and Warnings

Be aware of pinch points at hinges when adjusting LCD Arm and LCD Monitor.
6-2-3

Access to Adjustments

NOTE: Before starting these adjustments, ensure that the correct monitor (17" or 19") has been
selected in the dropdown menu on the Config > Service screen.
The monitor adjustment is done via three controls (buttons) on front of the monitor.
The LCD settings have been optimized at the factory, so normally, there should be no need for any
further adjustments.
Default Brightness for the 19" LCD screen on VIVID E9 is: 89%.
Under special light conditions, you may want to adjust the LCD screen's Brightness.
NOTE: Adjustments on the monitor will influence all modes. If you only want to change the settings for
one mode, please refer to:
6-2-3-1 Review Test Patterns
Through the Touch Panel, access Utilities / Test Patterns to review the test patterns.
The available test images are described in:
6-2-4

LCD Adjustment Procedure

Default Brightness is: 89%.
6-2-4-1 Brightness
• To reduce the brightness, press the left arrow button. A popup box with the current brightness
setting will be displayed on the screen.
• To increase the brightness, press the right button.
• Push the mode button once to remove the popup bow from the screen and save the current values.
6 - 2
5
EVISION
Section 6-4 "Backlight adjustment" on page
Section 6-4 "Backlight adjustment" on page
Figure 6-1 LCD adjustment buttons
Section 6-2 - LCD Monitor adjustments
LEFT MODE RIGHT
6-4-6 "Test Images" on page
VIVID E9 S M
ERVICE
6-5.
6-5.
6-7.
ANUAL