When To Load Or Reload The Software - GE VIVID E9 Service Manual

GE H
EALTHCARE
D GA091568, R
IRECTION
8-4-8

When to load or reload the software

The software loading procedure is somewhat different, depending on why you need to load the software.
Use the table below to make the choice.
Table 8-3
• The software installed on the VIVID E9 has become corrupted
• VIVID E9's configuration/setup has issues that are difficult to troubleshoot
and resolve, so it may be easier to do a software reload, and start the
setup from scratch.
The same as above, but it is impossible to access OLC.
• You want to erase all data on the HDD
• BEP or HDD has been exchanged.
• The other methods failed.
8 - 12
5
EVISION
Installation choices
Why
Section 8-4 - Reloading the software
8-4-9 "Reloading the Software from Repository" on page 8-13.
8-4-10 "Loading the Software - from DVD/CD" on page
(When asked, select B.)
8-4-10 "Loading the Software - from DVD/CD" on page
(When asked, select A.)
VIVID E9 S
ERVICE
Start here
8-16.
8-16.
M
ANUAL